Are you looking to upgrade the wheels on your Impala 2013? In this article, we will guide you through the process of fitting 22s on your Impala and provide you with all the information you need to know to make sure they fit perfectly. From the bolt pattern for 2012 Chevy Impala to the step-by-step process, we’ve got you covered.

Key Points:

  • Fitting 22s on your Impala can enhance its aesthetics and performance.
  • A bolt pattern defines the arrangement and number of lugs on a wheel.
  • The recommended tire size for 22s on an Impala is 245/30/22.
  • A bottle jack can help you lift the car to ensure a proper fit.

Step 1: Understanding Bolt Patterns

Before proceeding with the installation, it’s crucial to understand the bolt pattern of your Impala. The bolt pattern for a 2012 Chevy Impala is typically 5x120, which means there are five lugs with a distance of 120mm between them. This measurement is essential to ensure compatibility with the new wheels.

Step 2: Choosing the Right Tire Size

For the best fit and performance on your Impala, we recommend using 245/30/22 tires. These tires strike a balance between comfort and performance, providing a smooth ride while maintaining proper clearance. Some individuals opt for 235/30/22 tires, but the slightly wider 245 tires offer a smoother ride.

Step 3: Preparing for Installation

Before installing the new wheels, clean and paint them if necessary. This step ensures that your Impala will look its best with the new wheels. Make sure to remove any scratches or dings for a flawless finish.

Step 4: Mounting the Wheels

To begin the installation process, remove the existing wheels from your Impala. Once removed, place the new 22-inch wheels onto the wheel hubs. You will notice that the new wheels are slightly larger than the factory ones, but the difference is not significant.

Step 5: Ensuring Proper Clearance

One common concern when fitting larger wheels is clearance. To address this, some people use lifters in the springs, which helps with clearance for the wheel itself. However, it may still cause clearance issues with the plate behind the wheel. To prevent this, use a bottle jack to lift the car and press it against the strut plate. By doing so, you can create enough clearance for the new wheels.

Step 6: Installing the Wheels

Once you have lifted the car with the bottle jack, place the new wheels onto the wheel hubs. Ensure that there is adequate space between the wheels and the surrounding components, particularly the fenders. This step is crucial to avoid any rubbing or scraping, which can damage the wheels or other parts of your Impala.

Step 7: Test Fit and Final Touches

Congratulations! You have successfully fitted 22s onto your Impala. Take a step back and observe the improved aesthetics of your vehicle. Turn the wheels to ensure there are no clearance issues, and the tires do not rub against any components. If everything looks good, you are ready to hit the road!

Conclusion

Upgrading your Impala with 22s can give it a fresh and stylish look. By following the step-by-step process outlined in this article, you can ensure that the 22s fit perfectly on your Impala 2013. Remember to choose the right tire size, understand the bolt pattern, and use a bottle jack for adequate clearance. With the right tools and attention to detail, you can enjoy a smooth and safe ride with your newly fitted wheels. So, go ahead and make a bold statement with 22s on your Impala!