Car paint chips are a common issue that many drivers face. They can be unsightly and reduce the overall appearance of your vehicle. In this article, we will discuss how to fix paint chips on your car using the Dr. Color Chip system for a permanent repair.
Step 1: Understanding Dr. Color Chip
Dr. Color Chip is a paint repair system that provides an exact color match for your car. You can easily order the paint online by providing your vehicle information. The paint comes in a small bottle and is sufficient to fix multiple chips on your car. The system is designed to be easy to use and does not require any additional products such as a paint pen or rattle can.
Step 2: Preparing the Surface
Before starting the repair process, it is essential to ensure that the panel with the paint chips is clean. You can do this by rinsing the panel with water or doing a regular car wash. To remove any surface rust within the chips, you can use a fallout remover. Apply the fallout remover and let it sit for a few minutes before rinsing it off. For best results, you can also clay bar the panel to remove any contaminants and create a smooth surface.
Step 3: Preparing Rusty Chips (If Applicable)
If you have chips with residual surface rust, it is important to sand them down to ensure proper bonding of the paint. You can use a ballpoint pen or the back of a brush to create a sanding stick. Gently sand the rusted areas until the rust is removed. After sanding, clean the chip with isopropyl alcohol to ensure a clean surface for the paint to adhere to.
Step 4: Applying the Paint
Start by shaking the paint bottle to ensure that the color is well-mixed. Use the paintbrush provided or a micro brush to apply the paint to the chip. For larger chips, you can use the blotting technique to fill in the chip. For smaller chips, you can blob the paint next to the chip and spread it using the side of your thumb. It is important not to apply too much paint to avoid a raised appearance.
Step 5: Building Layers and Leveling
Allow the first layer of paint to dry before applying additional layers. Apply multiple layers until the chip is filled and the paint is level with the surrounding surface. If you overfill the chip, do not worry as it will be cleaned up in the next step. Once the paint is dry, use the Celax solution provided to seal in the chip and remove any excess paint. Apply the Celax solution to a cheesecloth and gently wipe off any excess paint, leaving behind a smooth and blended finish.
Step 6: Repeat the Process for Other Chips
Repeat the above steps for any other paint chips on your car. Take your time and ensure that each chip is properly filled and leveled. Remember to clean the surface with isopropyl alcohol before applying the paint, and use the Celax solution to seal in the chips and remove excess paint.
By following these steps, you can easily repair paint chips on your car using the Dr. Color Chip system. The result will be a professional and permanent repair that restores the appearance of your vehicle. Don’t let paint chips ruin the look of your car - fix them yourself and save money on expensive repairs.
