When it comes to choosing the best engine oil for your vehicle, there are many factors to consider. One of the most important is the oil’s performance, which can have a significant impact on your engine’s longevity and overall performance. In this article, we will compare two popular synthetic engine oils: Mobil 1 and Pennzoil Platinum. We will dive deep into their performance by examining the results of a noack volatility test, which measures engine wear, low-speed pre-ignition (LSPI), and carbon buildup. So, without further ado, let’s find out which oil comes out on top!
The Noack Volatility Test: Why It Matters
Before we discuss the test results, let’s understand the significance of the noack volatility test. This test measures the oil’s evaporation rate and determines how well it protects the engine from wear, LSPI, and carbon buildup. A lower noack rating indicates better oil performance, as it means the oil evaporates less and thus provides longer-lasting protection to the engine.
Testing Procedure
To conduct this test, the expert at Nate’s Interactive Auto used an oil catch can to collect the blow-by, which can significantly impact the overall performance of the oil. The engine oil was heated to operating temperatures, and a vacuum process was employed to assess each oil’s protective abilities.
Step 1: Mobil 1
The test commenced with the evaluation of Mobil 1 oil. Before the testing, the oil was weighed, and approximately seven ounces were used. The engine oil was heated to its operating temperature using a heating process that took about 60 minutes. Once the temperature reached the desired level, the vacuum process began to assess Mobil 1’s performance. The results were recorded, and it was found that 6.5 ounces of oil remained.
Step 2: Pennzoil Platinum
After assessing Mobil 1, it was time to evaluate Pennzoil Platinum. Just like in the previous step, the oil was weighed and approximately seven ounces were used. The engine oil was then heated to the operating temperature. Pennzoil Platinum performed admirably, with a maximum temperature of 243 degrees Fahrenheit. At the end of the test, 6.2 ounces of oil remained.
Comparison of Results
The test results showed that both Mobil 1 and Pennzoil Platinum performed exceptionally well. Mobil 1 had 6.5 ounces of oil remaining, while Pennzoil Platinum had 6.2 ounces. While the margin was relatively small, it is worth noting that no significant difference was observed in their protective abilities. Both oils demonstrated their effectiveness in terms of engine wear, LSPI, and carbon buildup prevention.
Conclusion: Mobil 1 and Pennzoil Platinum, Top-Notch Engine Oils
In conclusion, both Mobil 1 and Pennzoil Platinum proved to be outstanding engine oils that provide excellent protection and performance for your vehicle. While Mobil 1 has a slight advantage in terms of volume remaining after the test, the difference is not significant enough to disregard the effectiveness of Pennzoil Platinum. It is important to remember that these test results may not reflect real-world conditions comprehensively. However, this test does provide valuable insights into the performance of these two engine oils.
Both Mobil 1 and Pennzoil Platinum are highly regarded brands known for producing high-quality engine oils. The choice between the two ultimately comes down to personal preference and the specific needs of your vehicle. Both oils are capable of providing robust protection against engine wear, LSPI, and carbon buildup. Whether you choose Mobil 1 or Pennzoil Platinum, you can be confident that your engine will be well protected.
Share Your Experience
We would love to hear about your experience with these engine oils! Have you used Mobil 1 or Pennzoil Platinum in your vehicle? Did you notice any significant differences in engine performance or longevity? Share your thoughts and experiences in the comments below!
