Introduction

In this article, we will discuss how to open a door with a broken handle. We will be focusing on a specific case where the rear passenger driver’s side door of a 2000 Acura TL is not opening. The problem seems to be that the door is unlocked, but it remains shut. The video mentioned in this transcript provides a step-by-step guide on how to open the door in this situation.

Key Points

  1. The door in question is unlocked from both the inside and outside, but it will not open.
  2. The video presenter has tried taking apart various parts of the car, including removing the back seats and the door panel, but nothing has worked so far.
  3. It is believed that the exterior door handle needs to be replaced, but accessing it without opening the door is a challenge.
  4. The presenter has attempted to use various tools, such as a hanger, to pry the door open, but those methods have not been successful.
  5. Eventually, the presenter discovers a method that works by disconnecting the rod connected to the door handle assembly.
  6. By pulling on the rod forcefully using pliers, the door can be opened.
  7. Once the door is open, the exterior door handle can be replaced.

Step-by-Step Process

  1. Attempt to open the door from both the inside and outside but observe that it remains shut despite being unlocked.
  2. Take apart various parts of the car, such as removing the back seats and the door panel, to gain access to the interior of the door.
  3. Realize that the exterior door handle needs to be replaced, but understand that accessing it without opening the door is challenging.
  4. Try using tools like a hanger to pry the door open, but find that these methods are unsuccessful.
  5. Locate the rod connected to the door handle assembly inside the door.
  6. Disconnect the rod by clipping it off and sliding it out.
  7. Use pliers to forcefully pull on the rod until the door opens.
  8. Once the door is open, remove the broken exterior door handle.
  9. Look for a suitable replacement for the exterior door handle online.
  10. Purchase the replacement and proceed with installing it on the door.

Conclusion

Opening a door with a broken handle can be a frustrating experience, but with the methods described in the video and transcript, it is possible to overcome this issue. By carefully following the step-by-step process and utilizing the right tools, anyone can successfully open a door that seems to be stuck shut. Remember to exercise caution while attempting to open the door to avoid causing any further damage.