Introduction
When it comes to choosing the right engine oil for your vehicle, it’s important to consider factors such as performance, protection, and reliability. In this article, we will be comparing two popular engine oils on the market: Mobil 1 and Pennzoil Platinum. We will conduct a noack volatility test to determine which oil performs better in terms of engine wear, low-speed pre-ignition (LSPI), and carbon buildup. These factors can greatly impact and even damage your engine, making it crucial to choose the right oil for optimal performance.
The Importance of Noack Rating
Before delving into the comparison, let’s understand the significance of the noack rating. The noack rating measures the evaporation loss of an engine oil when subjected to high temperatures. A lower noack rating indicates lower evaporation loss, which is desirable as it means the oil will retain its protective properties for a longer duration.
Testing Procedure
To conduct the comparison, we will use an oil catch can to collect blow-by gases, which can be detrimental to the engine if not properly managed. The engine oil will be heated to operating temperatures and vacuumed to determine its ability to protect the engine.
Step 1: Weighing the Mobil 1 Oil
Before commencing the test, it is essential to measure the oil quantity accurately. In this case, the oil will be weighed to ensure a consistent starting point. A magnet is used to secure the lid tightly, and the temperature of the oil is noted as 55 degrees Fahrenheit.
Step 2: Heating the Oil
The oil is heated to operating temperatures using a heating process. Temperature measurements are taken from both the thermostat and the pot to ensure accuracy. Once the oil reaches 123.9 degrees Fahrenheit, the next step can be initiated.
Step 3: Vacuumin
Using a handheld gauge, a vacuum is applied to the oil to simulate real-world conditions. This process helps assess the oil’s ability to protect the engine in various scenarios, including high temperatures and pressure. The vacuum process is timed for 60 minutes.
Step 4: Assessing the Results
After completing the vacuum process, the remaining oil in the catch can is measured. In the case of Mobil 1, 6.5 ounces were left, indicating its ability to withstand engine stress and maintain its protective qualities.
Step 5: Testing Pennzoil Platinum
The same procedure is followed for Pennzoil Platinum. The initial weight of the oil is noted as 2.1 ounces, and the heating process begins. This oil reaches a maximum temperature of 243 degrees Fahrenheit. After the vacuum process, 6.2 ounces of Pennzoil Platinum are remaining, demonstrating its comparable performance to Mobil 1.
Comparative Analysis and Conclusion
Upon analyzing the results, it is evident that both Mobil 1 and Pennzoil Platinum are exceptional engine oils. Mobil 1 exhibited a slightly better performance with 6.5 ounces remaining, while Pennzoil Platinum retained 6.2 ounces. It is important to note that this test is not the most scientific measurement of oil performance, but it provides valuable insights into the ability of these oils to protect the engine under simulated conditions.
In conclusion, Mobil 1 and Pennzoil Platinum are both reliable choices for engine oils. Pennzoil has built a strong reputation for producing some of the best oils on the market, while Mobil 1 showcased its ability to hold its own in this test. For any car enthusiast, these engine oils offer excellent protection and performance.
If you have any personal experiences or insights regarding Mobil 1 or Pennzoil Platinum, we would love to hear them. Drop a comment below and let us know your thoughts. Thank you for watching!
