Replacing spark plug wires and preventing them from arcing and corroding is crucial for the optimal performance of your vehicle. In this guide, we will walk you through the process of replacing spark plug wires on a Honda Civic with a four-cylinder single rig cam non-VTEC engine. We will also share important tips on how to prevent arcing and corrosion. If you follow these steps, you can ensure a smooth transition and enhance the lifespan of your spark plug wires.
To start, gather the necessary tools and materials such as a set of car quest spark plug wires (part number 35-4214), a boot lubricant (anti-stick and dielectric grease), pliers, and a wire keeper. Now, let’s dive into the step-by-step process.
Step 1: Prepare for Replacement
Before tearing off the old spark plug wires, lay out the new set on top of the engine base for easy access. This will allow you to identify and replace each wire systematically without confusion.
Step 2: Apply Boot Lubricant
To prevent the wires from getting stuck and corroding in the future, apply a boot lubricant (anti-stick and dielectric grease) on the distributor side and on the boots of each wire. This will ensure easy removal when it’s time for future replacements.
Step 3: Replace the Wires
Replace each wire one at a time to avoid mixing them up. Start by pulling off the first wire and matching it up with the corresponding wire in the new set. Hold the boots together and stretch the wires to ensure they are the same length. Repeat this process for the remaining wires.
Step 4: Apply Lubricant to the Boots
Before installing each wire, apply a small amount of boot lubricant to the top of the spark plug. This will prevent sticking and make future replacements easier.
Step 5: Protect the Wires
To further prevent arcing and rubbing, use a wire keeper to secure the wires in place. The wire keeper acts as a spacer between the wires and the valve cover, preventing any damage or wear.
Step 6: Connect the Wires
Attach the wires to the distributor end, ensuring a secure and tight fit. Additionally, apply the electric connector to the end of the wire near the distributor. This will prevent arcing inside the plastic housing.
Congratulations! You have successfully replaced the spark plug wires on your Honda Civic. By following these steps, you have taken a vital preventive maintenance measure to keep your engine running smoothly and efficiently.
Preventing arcing and corrosion in spark plug wires is essential for maintaining optimal performance. By regularly replacing your wires and using boot lubricants, you can ensure that your wires remain in top condition, even under high heat conditions. This preventive maintenance not only saves you from costly repairs but also improves your vehicle’s overall performance and fuel efficiency.
In conclusion, if you want your vehicle to perform at its best, pay attention to the health of your spark plug wires. Regularly replace them, protect them with boot lubricant, and use wire keepers to prevent arcing and rubbing. By following these steps, you can enjoy a smooth and reliable driving experience. Don’t forget to smash that thumbs up button if you found this article useful, and if you haven’t already, subscribe to our channel for more automotive tips and guides. Have a great day!
